To be your specialist in Insulation, Sealing& Protection solutions

Our main products including cold shrink tubing, heat shrink tubing, PTFE tubing, PVDF heat shrink tubing, high temperature heat shrink tube, identification sleeve, permanent cable maker, wire etc.

Products

Braided Fiberglass Sleeve

Heat Shrink Tube

Cold Shrink Tubing

Others

  • Opens in new window
  • Opens in new window
  • Opens in new window

TZRS-EPDM150 (2X)
 
EPDM Rubber Heat Shrink Tubing
 
Description
 
  TZRS-EPDM150(2X) is a new type of heat shrink tubing product, which is made through complicated formulation of EPDM rubber and special resins. When TZRS-EPDM150(2X) is heated, its inside diameter quickly recovers to half of the expanded inside diameter as supplied to tightly wrap and cover the electronic components inside. Compared to normal EPDM tubing, TZRS-EPDM150(2X), cross linked through the irradiation of electronic accelerators, has much better physical and mechanical performance, higher dielectric strength, abrasion and wear resistance. It finds wide applications in electronics, automotive, and consumer goods markets for jacketing and protection to cables, pipes, and connectors etc and protecting solder joints, wires, cables, terminals, connectors and various electronic apparatus.
 
Features
 
*         Environmental friendly
 
*         Outstanding low and high-temperature performance
 
*         Higher shrink ratio than heat shrinkable silicone tubes
 
*         Excellent acids and alkalis resistance
 
*         Chemical solvent resistance
 
*         Ultraviolet light and weather aging resistance
 
*         Minimum shrink temperature:100°C
 
*         Minimum full recovery temperature :135°C
 
*         Continuous operating Temperature Range: -55~150°C
 
*         Shrink Ratio: 2:1
 
*         Use in 180-200°C
 
*         Standard color: Black
 
Technical Performance   

Properties

Typical Data

Test Method

Tensile Strength

14 Mpa

GB/T   528

Ultimate Elongation

400%

GB/T   528

Tear Strength

60Kn/M

ASTM   D 624

Dielectric Strength

12kV/mm

ASTM   D149

Density

1.1±0.05 g/cm3

ASTM   D 792

Volume Resistivity

≥2×1013

ASTM   D 257

Structure
Dimensions

Size
  (mm)

As Supplied(mm)

D

After Full Recovery(mm)

Scope of Application

(mm)

Standard Package

(m/spool)

I.D.(Max.)d

Wall Thickness w

φ6.0

≥6.0

≤3.0

0.8±0.10

3.5-6

50

φ8.0

≥8.0

≤4.0

0.9±0.10

4.5-8

50

φ10.0

≥10.0

≤5.0

1.2±0.10

5.5-9.5

50

φ12.0

≥12.0

≤6.0

1.2±0.10

6.5-11.5

20

φ16.0

≥16.0

≤8.0

1.5±0.15

8-15

20

φ20.0

≥20.0

≤10.0

1.5±0.15

11-19

20

φ30.0

≥30.0

≤15.0

1.8±0.15

17-29

20

φ40.0

≥40.0

≤20.0

2.0±0.15

22-38

20

φ50.0

≥50.0

≤25.0

2.0±0.20

27-48

10

φ60.0

≥60.0

≤30.0

2.0±0.30

32-58

10

φ70.0

≥70.0

≤35.0

2.0±0.30

38-68

10

NoteNon-standard dimensions and package are available on request

  • Opens in new window
  • Opens in new window
  • Opens in new window
Top Mail Bottom