To be your specialist in Insulation, Sealing& Protection solutions

Our main products including cold shrink tubing, heat shrink tubing, PTFE tubing, PVDF heat shrink tubing, high temperature heat shrink tube, identification sleeve, permanent cable maker, wire etc.

Products

Braided Fiberglass Sleeve

Heat Shrink Tube

Cold Shrink Tubing

Others

  • Opens in new window
  • Opens in new window
  • Opens in new window

SBRS-VBK
 
Semi-Rigid Adhesive Lined Heat Shrink Tubing
 
Description
 
SBRS-VBK is a dual-wall, heat shrinkable tubing designed to provide moisture proof encapsulation of an electrical splice in an automotive environment. Moisture may enter a splice area directly or indirectly via a capillary action between individual wires, thus causing corrosion.
 
The tubing is centered over the splice area and on heating the adhesive melts and is squeezed around where the wires are crimped or welded and between the conductors, by the shrinking action of the sleeve. The installed product provides low profile mechanical protection against flexing, abrasion and cut-through as well as electrical insulation. The jacket is flame-retarded.
 
Features
 
*         Semi rigid
 
*         High performance adhesive
 
*         Designed for wire harnesses/splices
 
*         Excellent mechanical properties
*         Operating temp.: -35°C ~+125°C
 
*         Min. shrink temp.: 110°C
 
*         Min. fully recovery temp.: 135°C
 
*         Shrink ratio: 4:1
 
*         RoHS compliant
*         Standard color: Black .Clear (Non-Flame retardant)
 
Technical Performance

Property

Typical Data

Test Method

Tensile strength

≥16MPa

ASTM D 2671

Ultimate elongation

≥400%

ASTM D 2671

Heat ageing Tensile   strength

≥13MPa

158℃×168h

Heat ageing Ultimate elongation

≥300%

158℃×168h

Longitudinal shrinkage

-8%~+8%

ASTM D 2671

Flammability

Self-extinguishing in 30 sec.

AMS-DTL-23053/4

Flammability

≥20kV/mm

IEC 60243

Volume resistance

≥1014Ω.cm

IEC 60093

Technical Performance of Adhesive

Property

Typical Data

Test Method/Condition

Softening point

135±5

ASTM E 28

Water absorption

<0.5%

ASTM D 570

Peel strength(PE)

≥120N/25mm

ASTM D 1000

Peel strength(AI)

≥80N/25mm

ASTM D 1000

Structure
Dimensions

Size

(mm)

As supplied

(mm)

After   recovered(mm)

Standard package

Inside diameter (Max.)

Total Wall thickness   (Min.)w1

Adhesive Thickness (Nom.)w2

(M/pcs)

Φ6.0

≥6.0

≤1.27

≥1.30

0.56

1.22

Φ8.0

≥8.0

≤1.65

≥1.52

0.76

1.22

Φ12.0

≥12.0

≤2.41

≥1.91

1.02

1.22

Φ18.0

≥18.0

≤4.45

≥2.41

1.37

1.22

Packaging
 
Standard packaging on 1.22m.
 
Other: Other cut lengths are available, please contact our sales department.
 
Cross Reference
 
Volsun VBK 6 / 1.27 ===== Tyco RBK-ILS-125-NR1
 
Volsun VBK 8 / 1.65 ===== Tyco RBK-ILS-125-NR2
 
Volsun VBK 12 / 2.41===== Tyco RBK-ILS-125-NR3
 
Volsun VBK 18 / 4.45===== Tyco RBK-ILS-125-NR4
  • Opens in new window
  • Opens in new window
  • Opens in new window
Top Mail Bottom