To be your specialist in Insulation, Sealing& Protection solutions

Our main products including cold shrink tubing, heat shrink tubing, PTFE tubing, PVDF heat shrink tubing, high temperature heat shrink tube, identification sleeve, permanent cable maker, wire etc.

Products

Braided Fiberglass Sleeve

Heat Shrink Tube

Cold Shrink Tubing

Others

  • Opens in new window
  • Opens in new window
  • Opens in new window

SBRS-110G(3X)(4X)NF
 
Environmentally Friendly Non-Flame Retardant Adhesive-lined Dual Wall Heat Shrink Tubing
 
Description
 
  SBRS-110G(3X)(4X)NF is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior sealing against water, corrosive gas and chemicals. Typical applications include environmental sealing of in-line splices, sealing and strain relief of connectors and terminals, abrasion protection and electrical insulation of automotive wiring harness splices and valuable components, fleet & marine sealing & protection and wire bundling etc.
 
Features
 
*         Shrink ratio:3:1、4:1
 
*         Flexible ,environment friendly
 
*         Shrink temperature:70°C~100°C
 
*         Continuous operating temperature: -45°C~110°C( -45°C~105°C for clear)
 
*         RoHS compliant
 
*         Standard colors: Black, White, Red , Yellow ,Green, Blue ,Clear. More colors are available upon request.  
 
Technical Performance

Property

Typical Data

Test Method/Condition

Tensile Strength

≥10.4MPa

ASTM D 2671

Elongation at break

≥300%

ASTM D 2671

Longitudinal Change

-8%~+8%

ASTM D 2671

Flammability

Non flame retardant

-

Dielectric strength

15kV/mm

IEC 60243

Volume resistivity

≥1014Ω.cm

IEC 60093

Technical Performance of Adhesive

Property

Typical Data

Test Method/Condition

Softening point

95±5℃

ASTM E 28

Water absorption

<0.5%

ASTM D 570

Peel strength(PE)

≥120N/25mm

ASTM D 1000

Peel strength(AI)

≥80N/25mm

ASTM D 1000

Structure
Dimensions (3:1)

Size(mm)

As supplied D(mm)

After full recovery (mm)

Standard Package

Inner diameter d

Wall thickness w1

The wall thickness of adhesive-layer w2

(M/Roll,

M/Pcs)

Φ2.4

≥2.4

≤0.80

0.90±0.15

0.35±0.10

200

Φ3.2

≥3.2

≤1.00

0.95±0.15

0.40±0.10

200

Φ4.8

≥4.8

≤1.60

1.10±0.15

0.40±0.10

100

Φ6.4

≥6.4

≤2.20

1.20±0.15

0.45±0.10

100

Φ7.9

≥7.9

≤2.70

1.35±0.15

0.50±0.10

100

Φ9.5

≥9.5

≤3.20

1.45±0.20

0.50±0.15

50

Φ12.7

≥12.7

≤4.20

1.70±0.20

0.50±0.15

25

Φ15.0

≥15.0

≤5.20

1.80±0.20

0.55±0.15

25

Φ19.1

≥19.1

≤6.30

2.00±0.20

0.55±0.15

25

Φ25.4

≥25.4

≤8.50

2.10±0.25

0.55±0.15

25

Φ30.0

≥30.0

≤10.2

2.20±0.25

0.60±0.15

1.22

Φ39.0

≥39.0

≤13.5

2.40±0.25

0.60±0.15

1.22

Φ50.0

≥50.0

≤17.0

2.70±0.25

0.80±0.15

1.22

Φ64.0

≥64.0

≤21.0

3.00±0.30

0.80±0.20

1.22

Φ76.0

≥76.0

≤25.0

3.00±0.30

1.00±0.20

1.22

Φ90.0

≥90.0

≤30.0

3.00±0.30

1.00±0.20

1.22

Φ100

≥100

≤34.0

3.00±0.30

1.00±0.20

1.22

Φ125

≥125

≤42.0

3.00±0.30

1.00±0.15

1.22

Note:Non-standard dimensions and packages are available on your request
 
Dimensions (4:1)

Size(mm)

As supplied D(mm)

After full recovery(mm)

Standard Package

Inner diameter

d

Wall thickness

w1

Wall thickness of adhesive-layer w2

(M/Roll,

M/Pcs)

Φ4.0

≥4.0

≤1.00

1.00±0.15

0.40±0.15

200

Φ6.0

≥6.0

≤1.50

1.10±0.15

0.40±0.15

100

Φ8.0

≥8.0

≤2.00

1.20±0.15

0.50±0.15

100

Φ12.0

≥12.0

≤3.00

1.40±0.15

0.50±0.15

25

Φ16.0

≥16.0

≤4.00

1.70±0.15

0.60±0.15

25

Φ20.0

≥20.0

≤5.00

2.00±0.25

0.60±0.15

25

Φ24.0

≥24.0

≤6.00

2.10±0.25

0.60±0.15

25

Φ32.0

≥32.0

≤8.00

2.40±0.25

0.70±0.15

1.22

Φ52.0

≥52.0

≤13.0

2.40±0.25

0.70±0.15

1.22

Note:Non-standard dimensions and packages are available on your request
  • Opens in new window
  • Opens in new window
  • Opens in new window
Top Mail Bottom