To be your specialist in Insulation, Sealing& Protection solutions

Our main products including cold shrink tubing, heat shrink tubing, PTFE tubing, PVDF heat shrink tubing, high temperature heat shrink tube, identification sleeve, permanent cable maker, wire etc.

Products

Braided Fiberglass Sleeve

Heat Shrink Tube

Cold Shrink Tubing

Others

  • Opens in new window
  • Opens in new window
  • Opens in new window

DBRS-125G (2X) (3X) YG

Yellow/Green Stripped Heat Shrink Tubing

Description

DBRS-125G(2X)(3X)YG is made through co-extrusion of two different colored specially formulated master batches of polyolefin and irradiation cross-linking process with electronic accelerators .Typical applications include identification of earth wire or other special cables and wires.

Features

Shrink Ratio:2:1,3:1

Highly flame retardantenvironment friendly

Shrink temperature:70°C125°C

Continuous operating temperature:

u  -55°C125°C  (2:1)

u  -55°C135°C (3:1)

RoHS compliant

Standard colors: Yellow/Green Striped

Technical Performance

Properties

Typical Data

Test Methods/conditions

Tensile strength

≥10.4MPa

ASTM D 2671

Elongation

≥300%

ASTM D 2671

Tensile strength after heat aging

≥7.3MPa

158℃×168h

Elongation after heat aging

≥100%

158℃×168h

Longitudinal change

-8%~+8%

ASTM D 2671

Flammability

VW-1

ASTM D 2671 C

Voltage withstand(Rated voltage 600V)

2500V,1min, no break down

UL 224

Heat shock

No cracks,no dripping

UL 224,250℃×4h

Dielectric strength

≥15kV/mm

ASTM D 149

Volume resistivity

≥1014Ω.cm

IEC 60093

Structure

Dimensions (2:1)

Size(mm)

As supplied D(mm)

After full recovery (mm)

Standard Package

(M/Roll)

Inner diameter d

Wall thickness w

φ1.0/0.70

1.5±0.3

≤0.70

0.28±0.10

200

φ1.5/0.90

2.0±0.3

≤0.90

0.30±0.10

200

φ2.0/1.00

2.5±0.3

≤1.00

0.35±0.10

200

φ2.5/1.30

3.0±0.3

≤1.30

0.36±0.10

200

φ3.0/1.50

3.5±0.4

≤1.50

0.38±0.10

200

φ3.5/1.80

4.0±0.4

≤1.80

0.40±0.10

200

φ4.0/2.00

4.5±0.4

≤2.00

0.45±0.10

200

φ4.5/2.30

5.0±0.4

≤2.30

0.45±0.10

100

φ5.0/2.50

5.5±0.4

≤2.50

0.45±0.10

100

φ6.0/3.00

6.5±0.4

≤3.00

0.50±0.10

100

φ7.0/3.50

7.5±0.4

≤3.50

0.50±0.10

100

φ8.0/4.00

8.5±0.5

≤4.00

0.55±0.10

100

φ9.0/4.50

9.5±0.5

≤4.50

0.55±0.10

100

φ10/5.00

10.5±0.5

≤5.00

0.55±0.10

100

φ11/5.50

11.5±0.5

≤5.50

0.60±0.10

100

φ12/6.00

12.5±0.5

≤6.00

0.60±0.10

100

φ13/6.50

13.5±0.5

≤6.50

0.60±0.10

100

φ14/7.00

14.5±0.5

≤7.00

0.65±0.10

100

φ15/7.50

15.5±0.6

≤7.50

0.70±0.10

100

φ16/8.00

16.5±0.6

≤8.00

0.70±0.10

100

φ17/8.50

17.5±0.6

≤8.50

0.70±0.10

100

φ18/9.00

19.0±0.7

≤9.00

0.70±0.15

100

φ20/10.0

22.0±0.7

≤10.0

0.75±0.15

100

φ22/11.0

24.0±0.7

≤11.0

0.80±0.15

100

φ25/12.5

26.0±0.7

≤12.5

0.90±0.15

50

φ28/14.0

29.0±0.7

≤14.0

0.90±0.15

50

φ30/15.0

31.5±0.7

≤15.0

0.95±0.15

50

φ35/17.5

36.5±0.7

≤17.5

0.95±0.15

50

φ40/20.0

41.5±0.7

≤20.0

1.00±0.20

50

Φ45/22.5

46.0±0.7

≤22.5

1.00±0.20

25

φ50/25.0

51.0±0.7

≤25.0

1.00±0.20

25

φ60/30.0

≥60.0

≤30.0

1.10±0.20

25

φ70/35.0

≥70.0

≤35.0

1.20±0.20

25

φ80/40.0

≥80.0

≤40.0

1.30±0.20

25

φ90/45.0

≥90.0

≤45.0

1.50±0.20

25

φ100/50.0

≥100.0

≤50.0

1.65±0.20

25

φ120/60.0

≥120.0

≤60.0

1.70±0.20

15

φ150/75.0

≥150.0

≤75.0

1.70±0.20

15

φ180/90.0

≥180.0

≤90.0

1.75±0.20

15

Dimensions (3:1)

Size(mm)

As Supplied D (mm)

After full recovery(mm)

Standard package

(M/Rolll)

Inner diameter d

Wall thickness w

φ1.5

≥1.6

≤0.50

≥0.50

200

φ2.4

≥2.4

≤0.80

≥0.50

200

φ3.0

≥3.2

≤1.00

≥0.55

200

φ4.5

≥4.8

≤1.50

≥0.60

100

φ6.0

≥6.4

≤2.00

≥0.65

100

φ9.0

≥9.5

≤3.00

≥0.75

100

φ12.0

≥12.7

≤4.00

≥0.75

50

φ18.0

≥19.1

≤6.00

≥0.85

50

φ24.0

≥25.4

≤8.00

≥1.00

50

φ39.0

≥39.0

≤13.0

≥1.15

50

Note: Non-standard dimensions and packages are available on request

 

  • Opens in new window
  • Opens in new window
  • Opens in new window
Top Mail Bottom