To be your specialist in Insulation, Sealing& Protection solutions

Our main products including cold shrink tubing, heat shrink tubing, PTFE tubing, PVDF heat shrink tubing, high temperature heat shrink tube, identification sleeve, permanent cable maker, wire etc.

Products

Braided Fiberglass Sleeve

Heat Shrink Tube

Cold Shrink Tubing

Others

  • Opens in new window
  • Opens in new window
  • Opens in new window

MTVLO

Military Grade, High Temperature, Oil Resistant Cable Identification Tags

Description

MTVLO-Military Grade, High Temperature, Oil Resistant Marker Tags are made by means of bombardment and cross-linking of the environmentally friendly polyolefin with high energy electron beams. MTVLO boasts amazingly high fluid resistance at high temperature for long time like JP-8 used for aviation fuel oil. Marker tags are non-adhesive that can be used to identify EMU for high-speed rails, subways, submarines and aerospace. Market tags are attached on large cables and wire bundles with cable ties and keep permanent identification.

Features

  • *         Resistant to high temperature fuel oil, lubricating oil and other organic solvent
  • *         Side entry Marker tags to big size cables and wire bundles retrofit and repair capability, without broken circuit and run down the machines.
  • *         Easy installation: only standard cable tie-wraps are needed to install marker tags. No extra steps required
  • *         High temperature resistance, rated temp. 135°C
  • *         High flame retardant, VW-1
  • *         ROHS compliant
  • *         Permanent identification, No melting at high temperature, no brittle in low temperature
  • *         Computer-printable, any characters and logo are easy to design.

Rated Temperature

  • *         Continuous operating temperature: -55°C~135°C/-67°F~275°F
  • *         Max. storage and transportation temp.: ≤50°C/122°F

Standards

  • *         American military standards AMS-DTL-23053/6, NF F 00-608
  • *         Color Code Soundness: SAE-AS 81531and MIL-STD-202F/215J

Structure

Dimensions

Order description

Width G(mm)

L Length(mm)

Printed Characters

Cable OD(mm)

Height G

Length l

MT-VLO-10.4-45/4-

10.4

45

10.4

25

5.0812.7

MT-VLO-10.4-53/4-

10.4

53

10.4

33

5.0812.7

MT-VLO-10.4-64/4-

10.4

64

10.4

44

5.0812.7

MT-VLO-10.4-76/6-

10.4

76

10.4

56

5.0812.7

MT-VLO-10.4-90/6-

10.4

90

10.4

70

5.0812.7

MT-VLO-15.0-45/4-

15.0

45

15.0

25

12.719.1

MT-VLO-15.0-53/4-

15.0

53

15.0

33

12.719.1

MT-VLO-15.0-64/4-

15.0

64

15.0

44

12.719.1

MT-VLO-15.0-76/6-

15.0

76

15.0

56

12.719.1

MT-VLO-15.0-90/6-

15.0

90

15.0

70

12.719.1

MT-VLO-20.3-45/4-

20.3

45

20.3

25

19.125.4

MT-VLO-20.3-53/4-

20.3

53

20.3

33

19.125.4

MT-VLO-20.3-64/4-

20.3

64

20.3

44

19.125.4

MT-VLO-20.3-76/6-

20.3

76

20.3

56

19.125.4

MT-VLO-20.3-90/6-

20.3

90

20.3

70

19.125.4

MT-VLO-25.4-45/4-

25.4

45

25.4

25

>25.4

MT-VLO-25.4-53/4-

25.4

53

25.4

33

>25.4

MT-VLO-25.4-64/4-

25.4

64

25.4

44

>25.4

MT-VLO-25.4-76/6-

25.4

76

25.4

56

>25.4

MT-VLO-25.4-90/6-

25.4

90

25.4

70

>25.4

 Technical Performance

Performance

Indicators

Test Method

Typical properties

Unit

States

Tensile Strength

Mpa

Unaged

≥13.8

ASTM G 154, MIL-DTL-23053E

ISO 37, 500mm/min

175°C, 168h, ISO188

Heat aged/ After   fluids/UV aged

≥11.1

Elongation at break

%

Unaged

200

Heat aged/ After fluid

100

Secant Modulus

Mpa

Unaged

<173

ASTM D 882

Voltage Withstand

V

Unaged / After aged

2500V No breakdown in 60 sec.

IEC 243, ASTM G 154

175°C, 168h, ISO 188

Dielectric Strength

MV/m

Before aged

19.7

Heat aged/ After fluid/   UV aged

15.8

Volume Resistivity

Ω.cm

Unaged

1014

IEC 93

Dielectric constant

-

Unaged

3.2

ASTM 150

Water Absorption

-

Unaged

0.5

ASTM 570, 23°C, 24h

Bare Copper Corrosion

-

Unaged

No corrosion

23°C, Rh 95±5%,24h

175°C,16h

Heat Shock

-

Unaged

No cracks, flowing,   dripping

Wind to the specified   mandrel, 225°C, 4h

Cold Flexibility

-

Unaged

No cracks

Wind to the specified   mandrel, -30°C, 1h

Flammability

-

Unaged

VW-1

IEC 60332-1-3 Ed.1.0 b:2004

Smoke Density

-

Unaged

-

DIN 5510-2

Toxcity Index

-

Unaged

-

BS 6853:1999


  • Opens in new window
  • Opens in new window
  • Opens in new window
Top Mail Bottom